Tools and items that will be needed in the assembly and setup but are not included in the kit:

6 Hex keys (T-handle allen wrench recommended for 2 largest sizes, but any allen wrench is acceptable):
1/16", 5/64", 3/32", 1/8", 9/64", 5/32"

Hammer (standard carpenter's style, not too small)

Nail punch (recommend concave tip, approximately 3mm or 1/8" minimum)

Slotted screwdriver, 1/4"

Needle nose pliers with wire cutter

Needle file (5", 0 cut)

Super glue, gel type

Flat equaling file (5", 4 cut)

#400 Wet-or-Dry sandpaper

Norton emery paper #3/0 (A621)

Radius gauges (6mm, 4.5mm)

Small level

Metric ruler